AWS Elastic File Service (version v1.*.*)

create_file_system

Creates a new, empty file system. The operation requires a creation token in the request that Amazon EFS uses to ensure idempotent creation (calling the operation with same creation token has no effect). If a file system does not currently exist that is owned by the caller's AWS account with the specified creation token, this operation does the following:
Creates a new, empty file system. The file system will have an Amazon EFS assigned ID, and an initial lifecycle state creating.
Returns with the description of the created file system.
Otherwise, this operation returns a FileSystemAlreadyExists error with the ID of the existing file system.
For basic use cases, you can use a randomly generated UUID for the creation token.
The idempotent operation allows you to retry a CreateFileSystem call without risk of creating an extra file system. This can happen when an initial call fails in a way that leaves it uncertain whether or not a file system was actually created. An example might be that a transport level timeout occurred or your connection was reset. As long as you use the same creation token, if the initial call had succeeded in creating a file system, the client can learn of its existence from the FileSystemAlreadyExists error.
The CreateFileSystem call returns while the file system's lifecycle state is still creating. You can check the file system creation status by calling the DescribeFileSystems operation, which among other things returns the file system state.
This operation also takes an optional PerformanceMode parameter that you choose for your file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. For more information, see Amazon EFS: Performance Modes. After the file system is fully created, Amazon EFS sets its lifecycle state to available, at which point you can create one or more mount targets for the file system in your VPC. For more information, see CreateMountTarget. You mount your Amazon EFS file system on an EC2 instances in your VPC by using the mount target. For more information, see Amazon EFS: How it Works.
This operation requires permissions for the elasticfilesystem:CreateFileSystem action.

Parameters

$body

Type: object

{
  "CreationToken" : "A string of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.",
  "KmsKeyId" : "The ID of the AWS KMS CMK to be used to protect the encrypted file system. This parameter is only required if you want to use a nondefault CMK. If this parameter is not specified, the default CMK for Amazon EFS is used. This ID can be in one of the following formats:  \n Key ID - A unique identifier of the key, for example 1234abcd-12ab-34cd-56ef-1234567890ab.  \n ARN - An Amazon Resource Name (ARN) for the key, for example arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab.  \n Key alias - A previously created display name for a key, for example alias/projectKey1.  \n Key alias ARN - An ARN for a key alias, for example arn:aws:kms:us-west-2:444455556666:alias/projectKey1.   \nIf KmsKeyId is specified, the CreateFileSystemRequest$Encrypted parameter must be set to true.",
  "PerformanceMode" : "The performance mode of the file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created.",
  "Encrypted" : "A Boolean value that, if true, creates an encrypted file system. When creating an encrypted file system, you have the option of specifying CreateFileSystemRequest$KmsKeyId for an existing AWS Key Management Service (AWS KMS) customer master key (CMK). If you don't specify a CMK, then the default CMK for Amazon EFS, /aws/elasticfilesystem, is used to protect the encrypted file system. ",
  "ProvisionedThroughputInMibps" : "The throughput, measured in MiB/s, that you want to provision for a file system that you're creating. Valid values are 1-1024. Required if ThroughputMode is set to provisioned. The upper limit for throughput is 1024 MiB/s. You can get this limit increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide. ",
  "ThroughputMode" : "The throughput mode for the file system to be created. There are two throughput modes to choose from for your file system: bursting and provisioned. If you set ThroughputMode to provisioned, you must also set a value for ProvisionedThroughPutInMibps. You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change. For more, see Specifying Throughput with Provisioned Mode in the Amazon EFS User Guide. ",
  "Tags" : [ {
    "Value" : "The value of the tag key.",
    "Key" : "The tag key (String). The key can't start with aws:."
  } ]
}

create_mount_target

Creates a mount target for a file system. You can then mount the file system on EC2 instances by using the mount target. You can create one mount target in each Availability Zone in your VPC. All EC2 instances in a VPC within a given Availability Zone share a single mount target for a given file system. If you have multiple subnets in an Availability Zone, you create a mount target in one of the subnets. EC2 instances do not need to be in the same subnet as the mount target in order to access their file system. For more information, see Amazon EFS: How it Works.
In the request, you also specify a file system ID for which you are creating the mount target and the file system's lifecycle state must be available. For more information, see DescribeFileSystems. In the request, you also provide a subnet ID, which determines the following:
VPC in which Amazon EFS creates the mount target
Availability Zone in which Amazon EFS creates the mount target
IP address range from which Amazon EFS selects the IP address of the mount target (if you don't specify an IP address in the request)
After creating the mount target, Amazon EFS returns a response that includes, a MountTargetId and an IpAddress. You use this IP address when mounting the file system in an EC2 instance. You can also use the mount target's DNS name when mounting the file system. The EC2 instance on which you mount the file system by using the mount target can resolve the mount target's DNS name to its IP address. For more information, see How it Works: Implementation Overview.
Note that you can create mount targets for a file system in only one VPC, and there can be only one mount target per Availability Zone. That is, if the file system already has one or more mount targets created for it, the subnet specified in the request to add another mount target must meet the following requirements:
Must belong to the same VPC as the subnets of the existing mount targets
Must not be in the same Availability Zone as any of the subnets of the existing mount targets
If the request satisfies the requirements, Amazon EFS does the following:
Creates a new mount target in the specified subnet.
Also creates a new network interface in the subnet as follows: If the request provides an IpAddress, Amazon EFS assigns that IP address to the network interface. Otherwise, Amazon EFS assigns a free address in the subnet (in the same way that the Amazon EC2 CreateNetworkInterface call does when a request does not specify a primary private IP address). If the request provides SecurityGroups, this network interface is associated with those security groups. Otherwise, it belongs to the default security group for the subnet's VPC. Assigns the description Mount target fsmt-id for file system fs-id where fsmt-id is the mount target ID, and fs-id is the FileSystemId. Sets the requesterManaged property of the network interface to true, and the requesterId value to EFS. Each Amazon EFS mount target has one corresponding requester-managed EC2 network interface. After the network interface is created, Amazon EFS sets the NetworkInterfaceId field in the mount target's description to the network interface ID, and the IpAddress field to its address. If network interface creation fails, the entire CreateMountTarget operation fails.
The CreateMountTarget call returns only after creating the network interface, but while the mount target state is still creating, you can check the mount target creation status by calling the DescribeMountTargets operation, which among other things returns the mount target state.
We recommend that you create a mount target in each of the Availability Zones. There are cost considerations for using a file system in an Availability Zone through a mount target created in another Availability Zone. For more information, see Amazon EFS. In addition, by always using a mount target local to the instance's Availability Zone, you eliminate a partial failure scenario. If the Availability Zone in which your mount target is created goes down, then you can't access your file system through that mount target.
This operation requires permissions for the following action on the file system:
elasticfilesystem:CreateMountTarget
This operation also requires permissions for the following Amazon EC2 actions:
ec2:DescribeSubnets
ec2:DescribeNetworkInterfaces
ec2:CreateNetworkInterface

Parameters

$body

Type: object

{
  "SecurityGroups" : [ "string" ],
  "FileSystemId" : "The ID of the file system for which to create the mount target.",
  "IpAddress" : "Valid IPv4 address within the address range of the specified subnet.",
  "SubnetId" : "The ID of the subnet to add the mount target in."
}

create_tags

Creates or overwrites tags associated with a file system. Each tag is a key-value pair. If a tag key specified in the request already exists on the file system, this operation overwrites its value with the value provided in the request. If you add the Name tag to your file system, Amazon EFS returns it in the response to the DescribeFileSystems operation.
This operation requires permission for the elasticfilesystem:CreateTags action.

Parameters

FileSystemId (required)

The ID of the file system whose tags you want to modify (String). This operation modifies the tags only, not the file system.

Type: string

$body

Type: object

{
  "Tags" : [ {
    "Value" : "The value of the tag key.",
    "Key" : "The tag key (String). The key can't start with aws:."
  } ]
}

delete_file_system

Deletes a file system, permanently severing access to its contents. Upon return, the file system no longer exists and you can't access any contents of the deleted file system. You can't delete a file system that is in use. That is, if the file system has any mount targets, you must first delete them. For more information, see DescribeMountTargets and DeleteMountTarget.
The DeleteFileSystem call returns while the file system state is still deleting. You can check the file system deletion status by calling the DescribeFileSystems operation, which returns a list of file systems in your account. If you pass file system ID or creation token for the deleted file system, the DescribeFileSystems returns a 404 FileSystemNotFound error.
This operation requires permissions for the elasticfilesystem:DeleteFileSystem action.

Parameters

FileSystemId (required)

The ID of the file system you want to delete.

Type: string

delete_mount_target

Deletes the specified mount target. This operation forcibly breaks any mounts of the file system by using the mount target that is being deleted, which might disrupt instances or applications using those mounts. To avoid applications getting cut off abruptly, you might consider unmounting any mounts of the mount target, if feasible. The operation also deletes the associated network interface. Uncommitted writes might be lost, but breaking a mount target using this operation does not corrupt the file system itself. The file system you created remains. You can mount an EC2 instance in your VPC by using another mount target. This operation requires permissions for the following action on the file system:
elasticfilesystem:DeleteMountTarget
The DeleteMountTarget call returns while the mount target state is still deleting. You can check the mount target deletion by calling the DescribeMountTargets operation, which returns a list of mount target descriptions for the given file system.
The operation also requires permissions for the following Amazon EC2 action on the mount target's network interface:
ec2:DeleteNetworkInterface

Parameters

MountTargetId (required)

The ID of the mount target to delete (String).

Type: string

delete_tags

Deletes the specified tags from a file system. If the DeleteTags request includes a tag key that doesn't exist, Amazon EFS ignores it and doesn't cause an error. For more information about tags and related restrictions, see Tag Restrictions in the AWS Billing and Cost Management User Guide. This operation requires permissions for the elasticfilesystem:DeleteTags action.

Parameters

FileSystemId (required)

The ID of the file system whose tags you want to delete (String).

Type: string

$body

Type: object

{
  "TagKeys" : [ "string" ]
}

describe_file_systems

Returns the description of a specific Amazon EFS file system if either the file system CreationToken or the FileSystemId is provided. Otherwise, it returns descriptions of all file systems owned by the caller's AWS account in the AWS Region of the endpoint that you're calling. When retrieving all file system descriptions, you can optionally specify the MaxItems parameter to limit the number of descriptions in a response. Currently, this number is automatically set to 10. If more file system descriptions remain, Amazon EFS returns a NextMarker, an opaque token, in the response. In this case, you should send a subsequent request with the Marker request parameter set to the value of NextMarker.
To retrieve a list of your file system descriptions, this operation is used in an iterative process, where DescribeFileSystems is called first without the Marker and then the operation continues to call it with the Marker parameter set to the value of the NextMarker from the previous response until the response has no NextMarker.
The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multi-call iteration is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeFileSystems action.

Parameters

CreationToken

(Optional) Restricts the list to the file system with this creation token (String). You specify a creation token when you create an Amazon EFS file system.

Type: string

FileSystemId

(Optional) ID of the file system whose description you want to retrieve (String).

Type: string

describe_lifecycle_configuration

Returns the current LifecycleConfiguration object for the specified Amazon EFS file system. EFS lifecycle management uses the LifecycleConfiguration object to identify which files to move to the EFS Infrequent Access (IA) storage class. For a file system without a LifecycleConfiguration object, the call returns an empty array in the response. This operation requires permissions for the elasticfilesystem:DescribeLifecycleConfiguration operation.

Parameters

FileSystemId (required)

The ID of the file system whose LifecycleConfiguration object you want to retrieve (String).

Type: string

describe_mount_target_security_groups

Returns the security groups currently in effect for a mount target. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted. This operation requires permissions for the following actions:
elasticfilesystem:DescribeMountTargetSecurityGroups action on the mount target's file system.
ec2:DescribeNetworkInterfaceAttribute action on the mount target's network interface.

Parameters

MountTargetId (required)

The ID of the mount target whose security groups you want to retrieve.

Type: string

describe_mount_targets

Returns the descriptions of all the current mount targets, or a specific mount target, for a file system. When requesting all of the current mount targets, the order of mount targets returned in the response is unspecified. This operation requires permissions for the elasticfilesystem:DescribeMountTargets action, on either the file system ID that you specify in FileSystemId, or on the file system of the mount target that you specify in MountTargetId.

Parameters

FileSystemId

(Optional) ID of the file system whose mount targets you want to list (String). It must be included in your request if MountTargetId is not included.

Type: string

MountTargetId

(Optional) ID of the mount target that you want to have described (String). It must be included in your request if FileSystemId is not included.

Type: string

describe_tags

Returns the tags associated with a file system. The order of tags returned in the response of one DescribeTags call and the order of tags returned across the responses of a multiple-call iteration (when using pagination) is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeTags action.

Parameters

FileSystemId (required)

The ID of the file system whose tag set you want to retrieve.

Type: string

modify_mount_target_security_groups

Modifies the set of security groups in effect for a mount target. When you create a mount target, Amazon EFS also creates a new network interface. For more information, see CreateMountTarget. This operation replaces the security groups in effect for the network interface associated with a mount target, with the SecurityGroups provided in the request. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted.
The operation requires permissions for the following actions:
elasticfilesystem:ModifyMountTargetSecurityGroups action on the mount target's file system.
ec2:ModifyNetworkInterfaceAttribute action on the mount target's network interface.

Parameters

MountTargetId (required)

The ID of the mount target whose security groups you want to modify.

Type: string

$body

Type: object

{
  "SecurityGroups" : [ "string" ]
}

put_lifecycle_configuration

Enables lifecycle management by creating a new LifecycleConfiguration object. A LifecycleConfiguration object defines when files in an Amazon EFS file system are automatically transitioned to the lower-cost EFS Infrequent Access (IA) storage class. A LifecycleConfiguration applies to all files in a file system. Each Amazon EFS file system supports one lifecycle configuration, which applies to all files in the file system. If a LifecycleConfiguration object already exists for the specified file system, a PutLifecycleConfiguration call modifies the existing configuration. A PutLifecycleConfiguration call with an empty LifecyclePolicies array in the request body deletes any existing LifecycleConfiguration and disables lifecycle management. In the request, specify the following:
The ID for the file system for which you are enabling, disabling, or modifying lifecycle management.
A LifecyclePolicies array of LifecyclePolicy objects that define when files are moved to the IA storage class. The array can contain only one LifecyclePolicy item.
This operation requires permissions for the elasticfilesystem:PutLifecycleConfiguration operation. To apply a LifecycleConfiguration object to an encrypted file system, you need the same AWS Key Management Service (AWS KMS) permissions as when you created the encrypted file system.

Parameters

FileSystemId (required)

The ID of the file system for which you are creating the LifecycleConfiguration object (String).

Type: string

$body

Type: object

{
  "LifecyclePolicies" : [ {
    "TransitionToIA" : " A value that describes the period of time that a file is not accessed, after which it transitions to the IA storage class. Metadata operations such as listing the contents of a directory don't count as file access events."
  } ]
}

update_file_system

Updates the throughput mode or the amount of provisioned throughput of an existing file system.

Parameters

FileSystemId (required)

The ID of the file system that you want to update.

Type: string

$body

Type: object

{
  "ProvisionedThroughputInMibps" : "(Optional) The amount of throughput, in MiB/s, that you want to provision for your file system. Valid values are 1-1024. Required if ThroughputMode is changed to provisioned on update. If you're not updating the amount of provisioned throughput for your file system, you don't need to provide this value in your request. ",
  "ThroughputMode" : "(Optional) The throughput mode that you want your file system to use. If you're not updating your throughput mode, you don't need to provide this value in your request. If you are changing the ThroughputMode to provisioned, you must also set a value for ProvisionedThroughputInMibps."
}