AWS Mechanical Turk (version v1.*.*)

accept_qualification_request

The AcceptQualificationRequest operation approves a Worker's request for a Qualification.
Only the owner of the Qualification type can grant a Qualification request for that type.
A successful request for the AcceptQualificationRequest operation returns with no errors and an empty body.

Parameters

$body

Type: object

{
  "QualificationRequestId" : "The ID of the Qualification request, as returned by the GetQualificationRequests operation.",
  "IntegerValue" : " The value of the Qualification. You can omit this value if you are using the presence or absence of the Qualification as the basis for a HIT requirement. "
}

approve_assignment

The ApproveAssignment operation approves the results of a completed assignment.
Approving an assignment initiates two payments from the Requester's Amazon.com account
The Worker who submitted the results is paid the reward specified in the HIT.
Amazon Mechanical Turk fees are debited.
If the Requester's account does not have adequate funds for these payments, the call to ApproveAssignment returns an exception, and the approval is not processed. You can include an optional feedback message with the approval, which the Worker can see in the Status section of the web site.
You can also call this operation for assignments that were previous rejected and approve them by explicitly overriding the previous rejection. This only works on rejected assignments that were submitted within the previous 30 days and only if the assignment's related HIT has not been deleted.

Parameters

$body

Type: object

{
  "OverrideRejection" : " A flag indicating that an assignment should be approved even if it was previously rejected. Defaults to False. ",
  "AssignmentId" : " The ID of the assignment. The assignment must correspond to a HIT created by the Requester. ",
  "RequesterFeedback" : " A message for the Worker, which the Worker can see in the Status section of the web site. "
}

associate_qualification_with_worker

The AssociateQualificationWithWorker operation gives a Worker a Qualification. AssociateQualificationWithWorker does not require that the Worker submit a Qualification request. It gives the Qualification directly to the Worker.
You can only assign a Qualification of a Qualification type that you created (using the CreateQualificationType operation).
Note: AssociateQualificationWithWorker does not affect any pending Qualification requests for the Qualification by the Worker. If you assign a Qualification to a Worker, then later grant a Qualification request made by the Worker, the granting of the request may modify the Qualification score. To resolve a pending Qualification request without affecting the Qualification the Worker already has, reject the request with the RejectQualificationRequest operation.

Parameters

$body

Type: object

{
  "IntegerValue" : "The value of the Qualification to assign.",
  "QualificationTypeId" : "The ID of the Qualification type to use for the assigned Qualification.",
  "WorkerId" : " The ID of the Worker to whom the Qualification is being assigned. Worker IDs are included with submitted HIT assignments and Qualification requests. ",
  "SendNotification" : " Specifies whether to send a notification email message to the Worker saying that the qualification was assigned to the Worker. Note: this is true by default. "
}

create_additional_assignments_for_hi_t

The CreateAdditionalAssignmentsForHIT operation increases the maximum number of assignments of an existing HIT.
To extend the maximum number of assignments, specify the number of additional assignments.
HITs created with fewer than 10 assignments cannot be extended to have 10 or more assignments. Attempting to add assignments in a way that brings the total number of assignments for a HIT from fewer than 10 assignments to 10 or more assignments will result in an AWS.MechanicalTurk.InvalidMaximumAssignmentsIncrease exception.
HITs that were created before July 22, 2015 cannot be extended. Attempting to extend HITs that were created before July 22, 2015 will result in an AWS.MechanicalTurk.HITTooOldForExtension exception.

Parameters

$body

Type: object

{
  "HITId" : "The ID of the HIT to extend.",
  "UniqueRequestToken" : " A unique identifier for this request, which allows you to retry the call on error without extending the HIT multiple times. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the extend HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return an error with a message containing the request ID. ",
  "NumberOfAdditionalAssignments" : "The number of additional assignments to request for this HIT."
}

create_hi_t

The CreateHIT operation creates a new Human Intelligence Task (HIT). The new HIT is made available for Workers to find and accept on the Amazon Mechanical Turk website.
This operation allows you to specify a new HIT by passing in values for the properties of the HIT, such as its title, reward amount and number of assignments. When you pass these values to CreateHIT, a new HIT is created for you, with a new HITTypeID. The HITTypeID can be used to create additional HITs in the future without needing to specify common parameters such as the title, description and reward amount each time. An alternative way to create HITs is to first generate a HITTypeID using the CreateHITType operation and then call the CreateHITWithHITType operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.
CreateHIT also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.
If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

Parameters

$body

Type: object

{
  "Keywords" : " One or more words or phrases that describe the HIT, separated by commas. These words are used in searches to find HITs. ",
  "Description" : " A general description of the HIT. A description includes detailed information about the kind of task the HIT contains. On the Amazon Mechanical Turk web site, the HIT description appears in the expanded view of search results, and in the HIT and assignment screens. A good description gives the user enough information to evaluate the HIT before accepting it. ",
  "HITLayoutId" : " The HITLayoutId allows you to use a pre-existing HIT design with placeholder values and create an additional HIT by providing those values as HITLayoutParameters.  \n Constraints: Either a Question parameter or a HITLayoutId parameter must be provided. ",
  "Title" : " The title of the HIT. A title should be short and descriptive about the kind of task the HIT contains. On the Amazon Mechanical Turk web site, the HIT title appears in search results, and everywhere the HIT is mentioned. ",
  "RequesterAnnotation" : " An arbitrary data field. The RequesterAnnotation parameter lets your application attach arbitrary data to the HIT for tracking purposes. For example, this parameter could be an identifier internal to the Requester's application that corresponds with the HIT.  \n The RequesterAnnotation parameter for a HIT is only visible to the Requester who created the HIT. It is not shown to the Worker, or any other Requester.  \n The RequesterAnnotation parameter may be different for each HIT you submit. It does not affect how your HITs are grouped. ",
  "MaxAssignments" : " The number of times the HIT can be accepted and completed before the HIT becomes unavailable. ",
  "HITReviewPolicy" : {
    "Parameters" : [ {
      "MapEntries" : [ {
        "Values" : [ "string" ],
        "Key" : " The QuestionID from the HIT that is used to identify which question requires Mechanical Turk to score as part of the ScoreMyKnownAnswers/2011-09-01 Review Policy. "
      } ],
      "Values" : [ "string" ],
      "Key" : " Name of the parameter from the list of Review Polices. "
    } ],
    "PolicyName" : " Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01 "
  },
  "AutoApprovalDelayInSeconds" : " The number of seconds after an assignment for the HIT has been submitted, after which the assignment is considered Approved automatically unless the Requester explicitly rejects it. ",
  "AssignmentReviewPolicy" : {
    "Parameters" : [ {
      "MapEntries" : [ {
        "Values" : [ "string" ],
        "Key" : " The QuestionID from the HIT that is used to identify which question requires Mechanical Turk to score as part of the ScoreMyKnownAnswers/2011-09-01 Review Policy. "
      } ],
      "Values" : [ "string" ],
      "Key" : " Name of the parameter from the list of Review Polices. "
    } ],
    "PolicyName" : " Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01 "
  },
  "HITLayoutParameters" : [ {
    "Value" : "The value substituted for the parameter referenced in the HITLayout. ",
    "Name" : " The name of the parameter in the HITLayout. "
  } ],
  "Question" : " The data the person completing the HIT uses to produce the results.  \n Constraints: Must be a QuestionForm data structure, an ExternalQuestion data structure, or an HTMLQuestion data structure. The XML question data must not be larger than 64 kilobytes (65,535 bytes) in size, including whitespace.  \nEither a Question parameter or a HITLayoutId parameter must be provided.",
  "Reward" : " The amount of money the Requester will pay a Worker for successfully completing the HIT. ",
  "QualificationRequirements" : [ {
    "LocaleValues" : [ {
      "Country" : " The country of the locale. Must be a valid ISO 3166 country code. For example, the code US refers to the United States of America. ",
      "Subdivision" : "The state or subdivision of the locale. A valid ISO 3166-2 subdivision code. For example, the code WA refers to the state of Washington."
    } ],
    "RequiredToPreview" : " DEPRECATED: Use the ActionsGuarded field instead. If RequiredToPreview is true, the question data for the HIT will not be shown when a Worker whose Qualifications do not meet this requirement tries to preview the HIT. That is, a Worker's Qualifications must meet all of the requirements for which RequiredToPreview is true in order to preview the HIT. If a Worker meets all of the requirements where RequiredToPreview is true (or if there are no such requirements), but does not meet all of the requirements for the HIT, the Worker will be allowed to preview the HIT's question data, but will not be allowed to accept and complete the HIT. The default is false. This should not be used in combination with the ActionsGuarded field. ",
    "QualificationTypeId" : " The ID of the Qualification type for the requirement.",
    "ActionsGuarded" : " Setting this attribute prevents Workers whose Qualifications do not meet this QualificationRequirement from taking the specified action. Valid arguments include \"Accept\" (Worker cannot accept the HIT, but can preview the HIT and see it in their search results), \"PreviewAndAccept\" (Worker cannot accept or preview the HIT, but can see the HIT in their search results), and \"DiscoverPreviewAndAccept\" (Worker cannot accept, preview, or see the HIT in their search results). It's possible for you to create a HIT with multiple QualificationRequirements (which can have different values for the ActionGuarded attribute). In this case, the Worker is only permitted to perform an action when they have met all QualificationRequirements guarding the action. The actions in the order of least restrictive to most restrictive are Discover, Preview and Accept. For example, if a Worker meets all QualificationRequirements that are set to DiscoverPreviewAndAccept, but do not meet all requirements that are set with PreviewAndAccept, then the Worker will be able to Discover, i.e. see the HIT in their search result, but will not be able to Preview or Accept the HIT. ActionsGuarded should not be used in combination with the RequiredToPreview field. ",
    "IntegerValues" : [ "integer" ],
    "Comparator" : "The kind of comparison to make against a Qualification's value. You can compare a Qualification's value to an IntegerValue to see if it is LessThan, LessThanOrEqualTo, GreaterThan, GreaterThanOrEqualTo, EqualTo, or NotEqualTo the IntegerValue. You can compare it to a LocaleValue to see if it is EqualTo, or NotEqualTo the LocaleValue. You can check to see if the value is In or NotIn a set of IntegerValue or LocaleValue values. Lastly, a Qualification requirement can also test if a Qualification Exists or DoesNotExist in the user's profile, regardless of its value. "
  } ],
  "UniqueRequestToken" : " A unique identifier for this request which allows you to retry the call on error without creating duplicate HITs. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return a AWS.MechanicalTurk.HitAlreadyExists error with a message containing the HITId.   \n Note: It is your responsibility to ensure uniqueness of the token. The unique token expires after 24 hours. Subsequent calls using the same UniqueRequestToken made after the 24 hour limit could create duplicate HITs. ",
  "LifetimeInSeconds" : " An amount of time, in seconds, after which the HIT is no longer available for users to accept. After the lifetime of the HIT elapses, the HIT no longer appears in HIT searches, even if not all of the assignments for the HIT have been accepted. ",
  "AssignmentDurationInSeconds" : " The amount of time, in seconds, that a Worker has to complete the HIT after accepting it. If a Worker does not complete the assignment within the specified duration, the assignment is considered abandoned. If the HIT is still active (that is, its lifetime has not elapsed), the assignment becomes available for other users to find and accept. "
}

create_hit_type

The CreateHITType operation creates a new HIT type. This operation allows you to define a standard set of HIT properties to use when creating HITs. If you register a HIT type with values that match an existing HIT type, the HIT type ID of the existing type will be returned.

Parameters

$body

Type: object

{
  "Keywords" : " One or more words or phrases that describe the HIT, separated by commas. These words are used in searches to find HITs. ",
  "Description" : " A general description of the HIT. A description includes detailed information about the kind of task the HIT contains. On the Amazon Mechanical Turk web site, the HIT description appears in the expanded view of search results, and in the HIT and assignment screens. A good description gives the user enough information to evaluate the HIT before accepting it. ",
  "AutoApprovalDelayInSeconds" : " The number of seconds after an assignment for the HIT has been submitted, after which the assignment is considered Approved automatically unless the Requester explicitly rejects it. ",
  "Title" : " The title of the HIT. A title should be short and descriptive about the kind of task the HIT contains. On the Amazon Mechanical Turk web site, the HIT title appears in search results, and everywhere the HIT is mentioned. ",
  "Reward" : " The amount of money the Requester will pay a Worker for successfully completing the HIT. ",
  "QualificationRequirements" : [ {
    "LocaleValues" : [ {
      "Country" : " The country of the locale. Must be a valid ISO 3166 country code. For example, the code US refers to the United States of America. ",
      "Subdivision" : "The state or subdivision of the locale. A valid ISO 3166-2 subdivision code. For example, the code WA refers to the state of Washington."
    } ],
    "RequiredToPreview" : " DEPRECATED: Use the ActionsGuarded field instead. If RequiredToPreview is true, the question data for the HIT will not be shown when a Worker whose Qualifications do not meet this requirement tries to preview the HIT. That is, a Worker's Qualifications must meet all of the requirements for which RequiredToPreview is true in order to preview the HIT. If a Worker meets all of the requirements where RequiredToPreview is true (or if there are no such requirements), but does not meet all of the requirements for the HIT, the Worker will be allowed to preview the HIT's question data, but will not be allowed to accept and complete the HIT. The default is false. This should not be used in combination with the ActionsGuarded field. ",
    "QualificationTypeId" : " The ID of the Qualification type for the requirement.",
    "ActionsGuarded" : " Setting this attribute prevents Workers whose Qualifications do not meet this QualificationRequirement from taking the specified action. Valid arguments include \"Accept\" (Worker cannot accept the HIT, but can preview the HIT and see it in their search results), \"PreviewAndAccept\" (Worker cannot accept or preview the HIT, but can see the HIT in their search results), and \"DiscoverPreviewAndAccept\" (Worker cannot accept, preview, or see the HIT in their search results). It's possible for you to create a HIT with multiple QualificationRequirements (which can have different values for the ActionGuarded attribute). In this case, the Worker is only permitted to perform an action when they have met all QualificationRequirements guarding the action. The actions in the order of least restrictive to most restrictive are Discover, Preview and Accept. For example, if a Worker meets all QualificationRequirements that are set to DiscoverPreviewAndAccept, but do not meet all requirements that are set with PreviewAndAccept, then the Worker will be able to Discover, i.e. see the HIT in their search result, but will not be able to Preview or Accept the HIT. ActionsGuarded should not be used in combination with the RequiredToPreview field. ",
    "IntegerValues" : [ "integer" ],
    "Comparator" : "The kind of comparison to make against a Qualification's value. You can compare a Qualification's value to an IntegerValue to see if it is LessThan, LessThanOrEqualTo, GreaterThan, GreaterThanOrEqualTo, EqualTo, or NotEqualTo the IntegerValue. You can compare it to a LocaleValue to see if it is EqualTo, or NotEqualTo the LocaleValue. You can check to see if the value is In or NotIn a set of IntegerValue or LocaleValue values. Lastly, a Qualification requirement can also test if a Qualification Exists or DoesNotExist in the user's profile, regardless of its value. "
  } ],
  "AssignmentDurationInSeconds" : " The amount of time, in seconds, that a Worker has to complete the HIT after accepting it. If a Worker does not complete the assignment within the specified duration, the assignment is considered abandoned. If the HIT is still active (that is, its lifetime has not elapsed), the assignment becomes available for other users to find and accept. "
}

create_hit_with_hit_type

The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation.
This is an alternative way to create HITs from the CreateHIT operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.
CreateHITWithHITType also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.
If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

Parameters

$body

Type: object

{
  "HITReviewPolicy" : {
    "Parameters" : [ {
      "MapEntries" : [ {
        "Values" : [ "string" ],
        "Key" : " The QuestionID from the HIT that is used to identify which question requires Mechanical Turk to score as part of the ScoreMyKnownAnswers/2011-09-01 Review Policy. "
      } ],
      "Values" : [ "string" ],
      "Key" : " Name of the parameter from the list of Review Polices. "
    } ],
    "PolicyName" : " Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01 "
  },
  "HITLayoutId" : " The HITLayoutId allows you to use a pre-existing HIT design with placeholder values and create an additional HIT by providing those values as HITLayoutParameters.  \n Constraints: Either a Question parameter or a HITLayoutId parameter must be provided. ",
  "AssignmentReviewPolicy" : {
    "Parameters" : [ {
      "MapEntries" : [ {
        "Values" : [ "string" ],
        "Key" : " The QuestionID from the HIT that is used to identify which question requires Mechanical Turk to score as part of the ScoreMyKnownAnswers/2011-09-01 Review Policy. "
      } ],
      "Values" : [ "string" ],
      "Key" : " Name of the parameter from the list of Review Polices. "
    } ],
    "PolicyName" : " Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01 "
  },
  "HITLayoutParameters" : [ {
    "Value" : "The value substituted for the parameter referenced in the HITLayout. ",
    "Name" : " The name of the parameter in the HITLayout. "
  } ],
  "Question" : " The data the person completing the HIT uses to produce the results.  \n Constraints: Must be a QuestionForm data structure, an ExternalQuestion data structure, or an HTMLQuestion data structure. The XML question data must not be larger than 64 kilobytes (65,535 bytes) in size, including whitespace.  \nEither a Question parameter or a HITLayoutId parameter must be provided.",
  "RequesterAnnotation" : " An arbitrary data field. The RequesterAnnotation parameter lets your application attach arbitrary data to the HIT for tracking purposes. For example, this parameter could be an identifier internal to the Requester's application that corresponds with the HIT.  \n The RequesterAnnotation parameter for a HIT is only visible to the Requester who created the HIT. It is not shown to the Worker, or any other Requester.  \n The RequesterAnnotation parameter may be different for each HIT you submit. It does not affect how your HITs are grouped. ",
  "HITTypeId" : "The HIT type ID you want to create this HIT with.",
  "MaxAssignments" : " The number of times the HIT can be accepted and completed before the HIT becomes unavailable. ",
  "UniqueRequestToken" : " A unique identifier for this request which allows you to retry the call on error without creating duplicate HITs. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return a AWS.MechanicalTurk.HitAlreadyExists error with a message containing the HITId.   \n Note: It is your responsibility to ensure uniqueness of the token. The unique token expires after 24 hours. Subsequent calls using the same UniqueRequestToken made after the 24 hour limit could create duplicate HITs. ",
  "LifetimeInSeconds" : " An amount of time, in seconds, after which the HIT is no longer available for users to accept. After the lifetime of the HIT elapses, the HIT no longer appears in HIT searches, even if not all of the assignments for the HIT have been accepted. "
}

create_qualification_type

The CreateQualificationType operation creates a new Qualification type, which is represented by a QualificationType data structure.

Parameters

$body

Type: object

{
  "QualificationTypeStatus" : "The initial status of the Qualification type. \nConstraints: Valid values are: Active | Inactive",
  "TestDurationInSeconds" : "The number of seconds the Worker has to complete the Qualification test, starting from the time the Worker requests the Qualification.",
  "AutoGrantedValue" : "The Qualification value to use for automatically granted Qualifications. This parameter is used only if the AutoGranted parameter is true.",
  "AnswerKey" : "The answers to the Qualification test specified in the Test parameter, in the form of an AnswerKey data structure. \nConstraints: Must not be longer than 65535 bytes. \nConstraints: None. If not specified, you must process Qualification requests manually.",
  "Keywords" : "One or more words or phrases that describe the Qualification type, separated by commas. The keywords of a type make the type easier to find during a search.",
  "Description" : "A long description for the Qualification type. On the Amazon Mechanical Turk website, the long description is displayed when a Worker examines a Qualification type.",
  "RetryDelayInSeconds" : "The number of seconds that a Worker must wait after requesting a Qualification of the Qualification type before the worker can retry the Qualification request. \nConstraints: None. If not specified, retries are disabled and Workers can request a Qualification of this type only once, even if the Worker has not been granted the Qualification. It is not possible to disable retries for a Qualification type after it has been created with retries enabled. If you want to disable retries, you must delete existing retry-enabled Qualification type and then create a new Qualification type with retries disabled.",
  "Test" : " The questions for the Qualification test a Worker must answer correctly to obtain a Qualification of this type. If this parameter is specified, TestDurationInSeconds must also be specified.  \nConstraints: Must not be longer than 65535 bytes. Must be a QuestionForm data structure. This parameter cannot be specified if AutoGranted is true. \nConstraints: None. If not specified, the Worker may request the Qualification without answering any questions.",
  "AutoGranted" : "Specifies whether requests for the Qualification type are granted immediately, without prompting the Worker with a Qualification test. \nConstraints: If the Test parameter is specified, this parameter cannot be true.",
  "Name" : " The name you give to the Qualification type. The type name is used to represent the Qualification to Workers, and to find the type using a Qualification type search. It must be unique across all of your Qualification types."
}

create_worker_block

The CreateWorkerBlock operation allows you to prevent a Worker from working on your HITs. For example, you can block a Worker who is producing poor quality work. You can block up to 100,000 Workers.

Parameters

$body

Type: object

{
  "WorkerId" : "The ID of the Worker to block.",
  "Reason" : "A message explaining the reason for blocking the Worker. This parameter enables you to keep track of your Workers. The Worker does not see this message."
}

delete_hi_t

The DeleteHIT operation is used to delete HIT that is no longer needed. Only the Requester who created the HIT can delete it.
You can only dispose of HITs that are in the Reviewable state, with all of their submitted assignments already either approved or rejected. If you call the DeleteHIT operation on a HIT that is not in the Reviewable state (for example, that has not expired, or still has active assignments), or on a HIT that is Reviewable but without all of its submitted assignments already approved or rejected, the service will return an error.
HITs are automatically disposed of after 120 days.
After you dispose of a HIT, you can no longer approve the HIT's rejected assignments.
Disposed HITs are not returned in results for the ListHITs operation.
Disposing HITs can improve the performance of operations such as ListReviewableHITs and ListHITs.

Parameters

$body

Type: object

{
  "HITId" : "The ID of the HIT to be deleted."
}

delete_qualification_type

The DeleteQualificationType deletes a Qualification type and deletes any HIT types that are associated with the Qualification type.
This operation does not revoke Qualifications already assigned to Workers because the Qualifications might be needed for active HITs. If there are any pending requests for the Qualification type, Amazon Mechanical Turk rejects those requests. After you delete a Qualification type, you can no longer use it to create HITs or HIT types.
DeleteQualificationType must wait for all the HITs that use the deleted Qualification type to be deleted before completing. It may take up to 48 hours before DeleteQualificationType completes and the unique name of the Qualification type is available for reuse with CreateQualificationType.

Parameters

$body

Type: object

{
  "QualificationTypeId" : "The ID of the QualificationType to dispose."
}

delete_worker_block

The DeleteWorkerBlock operation allows you to reinstate a blocked Worker to work on your HITs. This operation reverses the effects of the CreateWorkerBlock operation. You need the Worker ID to use this operation. If the Worker ID is missing or invalid, this operation fails and returns the message “WorkerId is invalid.” If the specified Worker is not blocked, this operation returns successfully.

Parameters

$body

Type: object

{
  "WorkerId" : "The ID of the Worker to unblock.",
  "Reason" : "A message that explains the reason for unblocking the Worker. The Worker does not see this message."
}

disassociate_qualification_from_worker

The DisassociateQualificationFromWorker revokes a previously granted Qualification from a user.
You can provide a text message explaining why the Qualification was revoked. The user who had the Qualification can see this message.

Parameters

$body

Type: object

{
  "QualificationTypeId" : "The ID of the Qualification type of the Qualification to be revoked.",
  "WorkerId" : "The ID of the Worker who possesses the Qualification to be revoked.",
  "Reason" : "A text message that explains why the Qualification was revoked. The user who had the Qualification sees this message."
}

get_account_balance

The GetAccountBalance operation retrieves the amount of money in your Amazon Mechanical Turk account.

Parameters

$body

Type: object

{ }

get_assignment

The GetAssignment operation retrieves the details of the specified Assignment.

Parameters

$body

Type: object

{
  "AssignmentId" : "The ID of the Assignment to be retrieved."
}

get_file_upload_ur_l

The GetFileUploadURL operation generates and returns a temporary URL. You use the temporary URL to retrieve a file uploaded by a Worker as an answer to a FileUploadAnswer question for a HIT. The temporary URL is generated the instant the GetFileUploadURL operation is called, and is valid for 60 seconds. You can get a temporary file upload URL any time until the HIT is disposed. After the HIT is disposed, any uploaded files are deleted, and cannot be retrieved. Pending Deprecation on December 12, 2017. The Answer Specification structure will no longer support the FileUploadAnswer element to be used for the QuestionForm data structure. Instead, we recommend that Requesters who want to create HITs asking Workers to upload files to use Amazon S3.

Parameters

$body

Type: object

{
  "QuestionIdentifier" : "The identifier of the question with a FileUploadAnswer, as specified in the QuestionForm of the HIT.",
  "AssignmentId" : "The ID of the assignment that contains the question with a FileUploadAnswer."
}

get_hi_t

The GetHIT operation retrieves the details of the specified HIT.

Parameters

$body

Type: object

{
  "HITId" : "The ID of the HIT to be retrieved."
}

get_qualification_score

The GetQualificationScore operation returns the value of a Worker's Qualification for a given Qualification type.
To get a Worker's Qualification, you must know the Worker's ID. The Worker's ID is included in the assignment data returned by the ListAssignmentsForHIT operation.
Only the owner of a Qualification type can query the value of a Worker's Qualification of that type.

Parameters

$body

Type: object

{
  "QualificationTypeId" : "The ID of the QualificationType.",
  "WorkerId" : "The ID of the Worker whose Qualification is being updated."
}

get_qualification_type

The GetQualificationTypeoperation retrieves information about a Qualification type using its ID.

Parameters

$body

Type: object

{
  "QualificationTypeId" : "The ID of the QualificationType."
}

list_assignments_for_hi_t

The ListAssignmentsForHIT operation retrieves completed assignments for a HIT. You can use this operation to retrieve the results for a HIT.
You can get assignments for a HIT at any time, even if the HIT is not yet Reviewable. If a HIT requested multiple assignments, and has received some results but has not yet become Reviewable, you can still retrieve the partial results with this operation.
Use the AssignmentStatus parameter to control which set of assignments for a HIT are returned. The ListAssignmentsForHIT operation can return submitted assignments awaiting approval, or it can return assignments that have already been approved or rejected. You can set AssignmentStatus=Approved,Rejected to get assignments that have already been approved and rejected together in one result set.
Only the Requester who created the HIT can retrieve the assignments for that HIT.
Results are sorted and divided into numbered pages and the operation returns a single page of results. You can use the parameters of the operation to control sorting and pagination.

Parameters

$body

Type: object

{
  "HITId" : "The ID of the HIT.",
  "AssignmentStatuses" : [ "string. Possible values: Submitted | Approved | Rejected" ]
}

list_bonus_payments

The ListBonusPayments operation retrieves the amounts of bonuses you have paid to Workers for a given HIT or assignment.

Parameters

$body

Type: object

{
  "HITId" : "The ID of the HIT associated with the bonus payments to retrieve. If not specified, all bonus payments for all assignments for the given HIT are returned. Either the HITId parameter or the AssignmentId parameter must be specified",
  "AssignmentId" : "The ID of the assignment associated with the bonus payments to retrieve. If specified, only bonus payments for the given assignment are returned. Either the HITId parameter or the AssignmentId parameter must be specified"
}

list_hi_ts

The ListHITs operation returns all of a Requester's HITs. The operation returns HITs of any status, except for HITs that have been deleted of with the DeleteHIT operation or that have been auto-deleted.

This operation has no parameters

list_hi_ts_for_qualification_type

The ListHITsForQualificationType operation returns the HITs that use the given Qualification type for a Qualification requirement. The operation returns HITs of any status, except for HITs that have been deleted with the DeleteHIT operation or that have been auto-deleted.

Parameters

$body

Type: object

{
  "QualificationTypeId" : " The ID of the Qualification type to use when querying HITs. "
}

list_qualification_requests

The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type. The owner of the Qualification type calls this operation to poll for pending requests, and accepts them using the AcceptQualification operation.

Parameters

$body

Type: object

{
  "QualificationTypeId" : "The ID of the QualificationType."
}

list_qualification_types

The ListQualificationTypes operation returns a list of Qualification types, filtered by an optional search term.

Parameters

$body

Type: object

{
  "MustBeRequestable" : "Specifies that only Qualification types that a user can request through the Amazon Mechanical Turk web site, such as by taking a Qualification test, are returned as results of the search. Some Qualification types, such as those assigned automatically by the system, cannot be requested directly by users. If false, all Qualification types, including those managed by the system, are considered. Valid values are True | False. ",
  "Query" : " A text query against all of the searchable attributes of Qualification types. ",
  "MustBeOwnedByCaller" : " Specifies that only Qualification types that the Requester created are returned. If false, the operation returns all Qualification types. "
}

list_review_policy_results_for_hi_t

The ListReviewPolicyResultsForHIT operation retrieves the computed results and the actions taken in the course of executing your Review Policies for a given HIT. For information about how to specify Review Policies when you call CreateHIT, see Review Policies. The ListReviewPolicyResultsForHIT operation can return results for both Assignment-level and HIT-level review results.

Parameters

$body

Type: object

{
  "NextToken" : "Pagination token",
  "RetrieveActions" : " Specify if the operation should retrieve a list of the actions taken executing the Review Policies and their outcomes. ",
  "RetrieveResults" : " Specify if the operation should retrieve a list of the results computed by the Review Policies. ",
  "PolicyLevels" : [ "string. Possible values: Assignment | HIT" ],
  "HITId" : "The unique identifier of the HIT to retrieve review results for.",
  "MaxResults" : "Limit the number of results returned."
}

list_reviewable_hi_ts

The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.

Parameters

$body

Type: object

{
  "Status" : " Can be either Reviewable or Reviewing. Reviewable is the default value. ",
  "HITTypeId" : " The ID of the HIT type of the HITs to consider for the query. If not specified, all HITs for the Reviewer are considered "
}

list_worker_blocks

The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.

This operation has no parameters

list_workers_with_qualification_type

The ListWorkersWithQualificationType operation returns all of the Workers that have been associated with a given Qualification type.

Parameters

$body

Type: object

{
  "Status" : " The status of the Qualifications to return. Can be Granted | Revoked. ",
  "QualificationTypeId" : "The ID of the Qualification type of the Qualifications to return."
}

notify_workers

The NotifyWorkers operation sends an email to one or more Workers that you specify with the Worker ID. You can specify up to 100 Worker IDs to send the same message with a single call to the NotifyWorkers operation. The NotifyWorkers operation will send a notification email to a Worker only if you have previously approved or rejected work from the Worker.

Parameters

$body

Type: object

{
  "MessageText" : "The text of the email message to send. Can include up to 4,096 characters",
  "Subject" : "The subject line of the email message to send. Can include up to 200 characters.",
  "WorkerIds" : [ "string" ]
}

reject_assignment

The RejectAssignment operation rejects the results of a completed assignment.
You can include an optional feedback message with the rejection, which the Worker can see in the Status section of the web site. When you include a feedback message with the rejection, it helps the Worker understand why the assignment was rejected, and can improve the quality of the results the Worker submits in the future.
Only the Requester who created the HIT can reject an assignment for the HIT.

Parameters

$body

Type: object

{
  "AssignmentId" : " The ID of the assignment. The assignment must correspond to a HIT created by the Requester. ",
  "RequesterFeedback" : " A message for the Worker, which the Worker can see in the Status section of the web site. "
}

reject_qualification_request

The RejectQualificationRequest operation rejects a user's request for a Qualification.
You can provide a text message explaining why the request was rejected. The Worker who made the request can see this message.

Parameters

$body

Type: object

{
  "QualificationRequestId" : " The ID of the Qualification request, as returned by the ListQualificationRequests operation. ",
  "Reason" : "A text message explaining why the request was rejected, to be shown to the Worker who made the request."
}

send_bonus

The SendBonus operation issues a payment of money from your account to a Worker. This payment happens separately from the reward you pay to the Worker when you approve the Worker's assignment. The SendBonus operation requires the Worker's ID and the assignment ID as parameters to initiate payment of the bonus. You must include a message that explains the reason for the bonus payment, as the Worker may not be expecting the payment. Amazon Mechanical Turk collects a fee for bonus payments, similar to the HIT listing fee. This operation fails if your account does not have enough funds to pay for both the bonus and the fees.

Parameters

$body

Type: object

{
  "AssignmentId" : "The ID of the assignment for which this bonus is paid.",
  "WorkerId" : "The ID of the Worker being paid the bonus.",
  "BonusAmount" : " The Bonus amount is a US Dollar amount specified using a string (for example, \"5\" represents $5.00 USD and \"101.42\" represents $101.42 USD). Do not include currency symbols or currency codes. ",
  "UniqueRequestToken" : "A unique identifier for this request, which allows you to retry the call on error without granting multiple bonuses. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the bonus already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return an error with a message containing the request ID.",
  "Reason" : "A message that explains the reason for the bonus payment. The Worker receiving the bonus can see this message."
}

send_test_event_notification

The SendTestEventNotification operation causes Amazon Mechanical Turk to send a notification message as if a HIT event occurred, according to the provided notification specification. This allows you to test notifications without setting up notifications for a real HIT type and trying to trigger them using the website. When you call this operation, the service attempts to send the test notification immediately.

Parameters

$body

Type: object

{
  "TestEventType" : " The event to simulate to test the notification specification. This event is included in the test message even if the notification specification does not include the event type. The notification specification does not filter out the test event. ",
  "Notification" : {
    "Destination" : " The target for notification messages. The Destination’s format is determined by the specified Transport:   \n When Transport is Email, the Destination is your email address.  \n When Transport is SQS, the Destination is your queue URL.  \n When Transport is SNS, the Destination is the ARN of your topic. ",
    "Version" : "The version of the Notification API to use. Valid value is 2006-05-05.",
    "EventTypes" : [ "string. Possible values: AssignmentAccepted | AssignmentAbandoned | AssignmentReturned | AssignmentSubmitted | AssignmentRejected | AssignmentApproved | HITCreated | HITExpired | HITReviewable | HITExtended | HITDisposed | Ping" ],
    "Transport" : " The method Amazon Mechanical Turk uses to send the notification. Valid Values: Email | SQS | SNS. "
  }
}

update_expiration_for_hi_t

The UpdateExpirationForHIT operation allows you update the expiration time of a HIT. If you update it to a time in the past, the HIT will be immediately expired.

Parameters

$body

Type: object

{
  "HITId" : " The HIT to update. ",
  "ExpireAt" : " The date and time at which you want the HIT to expire "
}

update_hit_review_status

The UpdateHITReviewStatus operation updates the status of a HIT. If the status is Reviewable, this operation can update the status to Reviewing, or it can revert a Reviewing HIT back to the Reviewable status.

Parameters

$body

Type: object

{
  "HITId" : " The ID of the HIT to update. ",
  "Revert" : " Specifies how to update the HIT status. Default is False.   \n  Setting this to false will only transition a HIT from Reviewable to Reviewing   \n  Setting this to true will only transition a HIT from Reviewing to Reviewable  "
}

update_hit_type_of_hi_t

The UpdateHITTypeOfHIT operation allows you to change the HITType properties of a HIT. This operation disassociates the HIT from its old HITType properties and associates it with the new HITType properties. The HIT takes on the properties of the new HITType in place of the old ones.

Parameters

$body

Type: object

{
  "HITId" : "The HIT to update.",
  "HITTypeId" : "The ID of the new HIT type."
}

update_notification_settings

The UpdateNotificationSettings operation creates, updates, disables or re-enables notifications for a HIT type. If you call the UpdateNotificationSettings operation for a HIT type that already has a notification specification, the operation replaces the old specification with a new one. You can call the UpdateNotificationSettings operation to enable or disable notifications for the HIT type, without having to modify the notification specification itself by providing updates to the Active status without specifying a new notification specification. To change the Active status of a HIT type's notifications, the HIT type must already have a notification specification, or one must be provided in the same call to UpdateNotificationSettings.

Parameters

$body

Type: object

{
  "Active" : " Specifies whether notifications are sent for HITs of this HIT type, according to the notification specification. You must specify either the Notification parameter or the Active parameter for the call to UpdateNotificationSettings to succeed. ",
  "HITTypeId" : " The ID of the HIT type whose notification specification is being updated. ",
  "Notification" : {
    "Destination" : " The target for notification messages. The Destination’s format is determined by the specified Transport:   \n When Transport is Email, the Destination is your email address.  \n When Transport is SQS, the Destination is your queue URL.  \n When Transport is SNS, the Destination is the ARN of your topic. ",
    "Version" : "The version of the Notification API to use. Valid value is 2006-05-05.",
    "EventTypes" : [ "string. Possible values: AssignmentAccepted | AssignmentAbandoned | AssignmentReturned | AssignmentSubmitted | AssignmentRejected | AssignmentApproved | HITCreated | HITExpired | HITReviewable | HITExtended | HITDisposed | Ping" ],
    "Transport" : " The method Amazon Mechanical Turk uses to send the notification. Valid Values: Email | SQS | SNS. "
  }
}

update_qualification_type

The UpdateQualificationType operation modifies the attributes of an existing Qualification type, which is represented by a QualificationType data structure. Only the owner of a Qualification type can modify its attributes.
Most attributes of a Qualification type can be changed after the type has been created. However, the Name and Keywords fields cannot be modified. The RetryDelayInSeconds parameter can be modified or added to change the delay or to enable retries, but RetryDelayInSeconds cannot be used to disable retries.
You can use this operation to update the test for a Qualification type. The test is updated based on the values specified for the Test, TestDurationInSeconds and AnswerKey parameters. All three parameters specify the updated test. If you are updating the test for a type, you must specify the Test and TestDurationInSeconds parameters. The AnswerKey parameter is optional; omitting it specifies that the updated test does not have an answer key.
If you omit the Test parameter, the test for the Qualification type is unchanged. There is no way to remove a test from a Qualification type that has one. If the type already has a test, you cannot update it to be AutoGranted. If the Qualification type does not have a test and one is provided by an update, the type will henceforth have a test.
If you want to update the test duration or answer key for an existing test without changing the questions, you must specify a Test parameter with the original questions, along with the updated values.
If you provide an updated Test but no AnswerKey, the new test will not have an answer key. Requests for such Qualifications must be granted manually.
You can also update the AutoGranted and AutoGrantedValue attributes of the Qualification type.

Parameters

$body

Type: object

{
  "QualificationTypeStatus" : "The new status of the Qualification type - Active | Inactive",
  "TestDurationInSeconds" : "The number of seconds the Worker has to complete the Qualification test, starting from the time the Worker requests the Qualification.",
  "AutoGrantedValue" : "The Qualification value to use for automatically granted Qualifications. This parameter is used only if the AutoGranted parameter is true.",
  "AnswerKey" : "The answers to the Qualification test specified in the Test parameter, in the form of an AnswerKey data structure.",
  "Description" : "The new description of the Qualification type.",
  "Test" : "The questions for the Qualification test a Worker must answer correctly to obtain a Qualification of this type. If this parameter is specified, TestDurationInSeconds must also be specified. \nConstraints: Must not be longer than 65535 bytes. Must be a QuestionForm data structure. This parameter cannot be specified if AutoGranted is true. \nConstraints: None. If not specified, the Worker may request the Qualification without answering any questions.",
  "RetryDelayInSeconds" : "The amount of time, in seconds, that Workers must wait after requesting a Qualification of the specified Qualification type before they can retry the Qualification request. It is not possible to disable retries for a Qualification type after it has been created with retries enabled. If you want to disable retries, you must dispose of the existing retry-enabled Qualification type using DisposeQualificationType and then create a new Qualification type with retries disabled using CreateQualificationType.",
  "AutoGranted" : "Specifies whether requests for the Qualification type are granted immediately, without prompting the Worker with a Qualification test. \nConstraints: If the Test parameter is specified, this parameter cannot be true.",
  "QualificationTypeId" : "The ID of the Qualification type to update."
}