AWS SQS (version v2.*.*)

add_permission

Adds a permission to a queue for a specific principal. This allows sharing access to the queue. When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Allow Developers to Write Messages to a Shared Queue in the Amazon Simple Queue Service Developer Guide.
AddPermission writes an Amazon-SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using Custom Policies with the Amazon SQS Access Policy Language in the Amazon Simple Queue Service Developer Guide. An Amazon SQS policy can have a maximum of 7 actions.
Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "AWSAccountIds" : [ "string" ],
  "Actions" : [ "string" ],
  "Label" : "The unique identification of the permission you're setting (for example, AliceSendMessage). Maximum 80 characters. Allowed characters include alphanumeric characters, hyphens (-), and underscores (_).",
  "QueueUrl" : "The URL of the Amazon SQS queue to which permissions are added. \nQueue URLs and names are case-sensitive."
}

change_message_visibility

Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide. For example, you have a message with a visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisibility with a timeout of 10 minutes. You can continue to call ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected. A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue. For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages. For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.
If you attempt to set the VisibilityTimeout to a value greater than the maximum time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate and increase the timeout to the maximum remaining time. Unlike with a queue, when you change the visibility timeout for a specific message the timeout value is applied immediately but isn't saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message reverts to the original timeout value (not to the value you set using the ChangeMessageVisibility action) the next time the message is received.

Parameters

$body

Type: object

{
  "ReceiptHandle" : "The receipt handle associated with the message whose visibility timeout is changed. This parameter is returned by the  ReceiveMessage  action.",
  "VisibilityTimeout" : "The new value for the message's visibility timeout (in seconds). Values values: 0 to 43200. Maximum: 12 hours.",
  "QueueUrl" : "The URL of the Amazon SQS queue whose message's visibility is changed. \nQueue URLs and names are case-sensitive."
}

change_message_visibility_batch

Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second

Parameters

$body

Type: object

{
  "Entries" : [ {
    "ReceiptHandle" : "A receipt handle.",
    "VisibilityTimeout" : "The new value (in seconds) for the message's visibility timeout.",
    "Id" : "An identifier for this particular receipt handle used to communicate the result.  \nThe Ids of a batch request need to be unique within a request"
  } ],
  "QueueUrl" : "The URL of the Amazon SQS queue whose messages' visibility is changed. \nQueue URLs and names are case-sensitive."
}

create_queue

Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following caveats in mind:
If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue. You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon Simple Queue Service Developer Guide.
If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues. To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:
If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "Attribute" : "A map of attributes with their corresponding values. \nThe following lists the names, descriptions, and values of the special request parameters that the CreateQueue action uses:  \n  DelaySeconds - The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 seconds (15 minutes). Default: 0.   \n  MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).   \n  MessageRetentionPeriod - The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer from 60 seconds (1 minute) to 1,209,600 seconds (14 days). Default: 345,600 (4 days).   \n  Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.   \n  ReceiveMessageWaitTimeSeconds - The length of time, in seconds, for which a  ReceiveMessage  action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.   \n  RedrivePolicy - The string that includes the parameters for the dead-letter queue functionality of the source queue. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.     deadLetterTargetArn - The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.    maxReceiveCount - The number of times a message is delivered to the source queue before being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.    The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.   \n  VisibilityTimeout - The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.   \nThe following attributes apply only to server-side-encryption:  \n  KmsMasterKeyId - The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs, the alias of a custom CMK can, for example, be alias/MyAlias . For more examples, see KeyId in the AWS Key Management Service API Reference.   \n  KmsDataKeyReusePeriodSeconds - The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?.    \nThe following attributes apply only to FIFO (first-in-first-out) queues:  \n  FifoQueue - Designates a queue as FIFO. Valid values: true, false. You can provide this attribute only during queue creation. You can't change it for an existing queue. When you set this attribute, you must also provide the MessageGroupId for your messages explicitly. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.  \n  ContentBasedDeduplication - Enables content-based deduplication. Valid values: true, false. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.    Every message must have a unique MessageDeduplicationId,   You may provide a MessageDeduplicationId explicitly.   If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).    If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.   If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.     When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.   If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.    ",
  "QueueName" : "The name of the new queue. The following limits apply to this name:  \n A queue name can have up to 80 characters.  \n Valid values: alphanumeric characters, hyphens (-), and underscores (_).  \n A FIFO queue name must end with the .fifo suffix.   \nQueue URLs and names are case-sensitive."
}

delete_message

Deletes the specified message from the specified queue. To select the message to delete, use the ReceiptHandle of the message (not the MessageId which you receive when you send the message). Amazon SQS can delete a message from a queue even if a visibility timeout setting causes the message to be locked by another consumer. Amazon SQS automatically deletes messages left in a queue longer than the retention period configured for the queue.
The ReceiptHandle is associated with a specific instance of receiving a message. If you receive a message more than once, the ReceiptHandle is different each time you receive a message. When you use the DeleteMessage action, you must provide the most recently received ReceiptHandle for the message (otherwise, the request succeeds, but the message might not be deleted). For standard queues, it is possible to receive a message even after you delete it. This might happen on rare occasions if one of the servers which stores a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you during a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.

Parameters

$body

Type: object

{
  "ReceiptHandle" : "The receipt handle associated with the message to delete.",
  "QueueUrl" : "The URL of the Amazon SQS queue from which messages are deleted. \nQueue URLs and names are case-sensitive."
}

delete_message_batch

Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the action on each message is reported individually in the response.
Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second

Parameters

$body

Type: object

{
  "Entries" : [ {
    "ReceiptHandle" : "A receipt handle.",
    "Id" : "An identifier for this particular receipt handle. This is used to communicate the result.  \nThe Ids of a batch request need to be unique within a request"
  } ],
  "QueueUrl" : "The URL of the Amazon SQS queue from which messages are deleted. \nQueue URLs and names are case-sensitive."
}

delete_queue

Deletes the queue specified by the QueueUrl, regardless of the queue's contents. If the specified queue doesn't exist, Amazon SQS returns a successful response.
Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.
When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist. When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "QueueUrl" : "The URL of the Amazon SQS queue to delete. \nQueue URLs and names are case-sensitive."
}

get_queue_attributes

Gets attributes for the specified queue.
To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second

Parameters

$body

Type: object

{
  "AttributeNames" : [ "string. Possible values: All | Policy | VisibilityTimeout | MaximumMessageSize | MessageRetentionPeriod | ApproximateNumberOfMessages | ApproximateNumberOfMessagesNotVisible | CreatedTimestamp | LastModifiedTimestamp | QueueArn | ApproximateNumberOfMessagesDelayed | DelaySeconds | ReceiveMessageWaitTimeSeconds | RedrivePolicy | FifoQueue | ContentBasedDeduplication | KmsMasterKeyId | KmsDataKeyReusePeriodSeconds" ],
  "QueueUrl" : "The URL of the Amazon SQS queue whose attribute information is retrieved. \nQueue URLs and names are case-sensitive."
}

get_queue_url

Returns the URL of an existing Amazon SQS queue. To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Allow Developers to Write Messages to a Shared Queue in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "QueueOwnerAWSAccountId" : "The AWS account ID of the account that created the queue.",
  "QueueName" : "The name of the queue whose URL must be fetched. Maximum 80 characters. Valid values: alphanumeric characters, hyphens (-), and underscores (_). \nQueue URLs and names are case-sensitive."
}

list_dead_letter_source_queues

Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead-letter queue. For more information about using dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "QueueUrl" : "The URL of a dead-letter queue. \nQueue URLs and names are case-sensitive."
}

list_queue_tags

List all cost allocation tags added to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide. When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "QueueUrl" : "The URL of the queue."
}

list_queues

Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "QueueNamePrefix" : "A string to use for filtering the list results. Only those queues whose name begins with the specified string are returned. \nQueue URLs and names are case-sensitive."
}

purge_queue

Deletes the messages in a queue specified by the QueueURL parameter.
When you use the PurgeQueue action, you can't retrieve any messages deleted from a queue. The message deletion process takes up to 60 seconds. We recommend waiting for 60 seconds regardless of your queue's size.
Messages sent to the queue before you call PurgeQueue might be received but are deleted within the next minute. Messages sent to the queue after you call PurgeQueue might be deleted while the queue is being purged.

Parameters

$body

Type: object

{
  "QueueUrl" : "The URL of the queue from which the PurgeQueue action deletes messages. \nQueue URLs and names are case-sensitive."
}

receive_message

Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon Simple Queue Service Developer Guide.
Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.
For each message returned, the response includes the following:
The message body.
An MD5 digest of the message body. For information about MD5, see RFC1321.
The MessageId you received when you sent the message to the queue.
The receipt handle.
The message attributes.
An MD5 digest of the message attributes.
The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon Simple Queue Service Developer Guide. You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide. A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead-letter queue.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

Parameters

$body

Type: object

{
  "MessageAttributeNames" : [ "string" ],
  "MaxNumberOfMessages" : "The maximum number of messages to return. Amazon SQS never returns more messages than this value (however, fewer messages might be returned). Valid values: 1 to 10. Default: 1.",
  "AttributeNames" : [ "string. Possible values: All | Policy | VisibilityTimeout | MaximumMessageSize | MessageRetentionPeriod | ApproximateNumberOfMessages | ApproximateNumberOfMessagesNotVisible | CreatedTimestamp | LastModifiedTimestamp | QueueArn | ApproximateNumberOfMessagesDelayed | DelaySeconds | ReceiveMessageWaitTimeSeconds | RedrivePolicy | FifoQueue | ContentBasedDeduplication | KmsMasterKeyId | KmsDataKeyReusePeriodSeconds" ],
  "VisibilityTimeout" : "The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request.",
  "WaitTimeSeconds" : "The duration (in seconds) for which the call waits for a message to arrive in the queue before returning. If a message is available, the call returns sooner than WaitTimeSeconds. If no messages are available and the wait time expires, the call returns successfully with an empty list of messages.",
  "ReceiveRequestAttemptId" : "This parameter applies only to FIFO (first-in-first-out) queues. \nThe token used for deduplication of ReceiveMessage calls. If a networking issue occurs after a ReceiveMessage action, and instead of a response you receive a generic error, you can retry the same action with an identical ReceiveRequestAttemptId to retrieve the same set of messages, even if their visibility timeout has not yet expired.  \n You can use ReceiveRequestAttemptId only for 5 minutes after a ReceiveMessage action.  \n When you set FifoQueue, a caller of the ReceiveMessage action can provide a ReceiveRequestAttemptId explicitly.  \n If a caller of the ReceiveMessage action doesn't provide a ReceiveRequestAttemptId, Amazon SQS generates a ReceiveRequestAttemptId.  \n You can retry the ReceiveMessage action with the same ReceiveRequestAttemptId if none of the messages have been modified (deleted or had their visibility changes).  \n During a visibility timeout, subsequent calls with the same ReceiveRequestAttemptId return the same messages and receipt handles. If a retry occurs within the deduplication interval, it resets the visibility timeout. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.  If a caller of the ReceiveMessage action still processes messages when the visibility timeout expires and messages become visible, another worker consuming from the same queue can receive the same messages and therefore process duplicates. Also, if a consumer whose message processing time is longer than the visibility timeout tries to delete the processed messages, the action fails with an error. To mitigate this effect, ensure that your application observes a safe threshold before the visibility timeout expires and extend the visibility timeout as necessary.   \n While messages with a particular MessageGroupId are invisible, no more messages belonging to the same MessageGroupId are returned until the visibility timeout expires. You can still receive messages with another MessageGroupId as long as it is also visible.  \n If a caller of ReceiveMessage can't track the ReceiveRequestAttemptId, no retries work until the original visibility timeout expires. As a result, delays might occur but the messages in the queue remain in a strict order.   \nThe length of ReceiveRequestAttemptId is 128 characters. ReceiveRequestAttemptId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~). \nFor best practices of using ReceiveRequestAttemptId, see Using the ReceiveRequestAttemptId Request Parameter in the Amazon Simple Queue Service Developer Guide.",
  "QueueUrl" : "The URL of the Amazon SQS queue from which messages are received. \nQueue URLs and names are case-sensitive."
}

remove_permission

Revokes any permissions in the queue policy that matches the specified Label parameter.
Only the owner of a queue can remove permissions from it. Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "Label" : "The identification of the permission to remove. This is the label added using the  AddPermission  action.",
  "QueueUrl" : "The URL of the Amazon SQS queue from which permissions are removed. \nQueue URLs and names are case-sensitive."
}

send_message

Delivers a message to the specified queue.
A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed: #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.

Parameters

$body

Type: object

{
  "MessageAttribute" : "Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS Message Attributes in the Amazon Simple Queue Service Developer Guide.",
  "DelaySeconds" : " The length of time, in seconds, for which to delay a specific message. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue applies.   \nWhen you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.",
  "MessageGroupId" : "This parameter applies only to FIFO (first-in-first-out) queues. \nThe tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.  \n You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.  \n  ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.   \nThe length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~). \nFor best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon Simple Queue Service Developer Guide.  \n MessageGroupId is required for FIFO queues. You can't use it for Standard queues.",
  "MessageDeduplicationId" : "This parameter applies only to FIFO (first-in-first-out) queues. \nThe token used for deduplication of sent messages. If a message with a particular MessageDeduplicationId is sent successfully, any messages sent with the same MessageDeduplicationId are accepted successfully but aren't delivered during the 5-minute deduplication interval. For more information, see  Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.  \n Every message must have a unique MessageDeduplicationId,   You may provide a MessageDeduplicationId explicitly.   If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).    If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.   If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.    \n When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.  \n If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.     \nThe MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues). \nIf a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages. \nAmazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.  \nThe length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~). \nFor best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon Simple Queue Service Developer Guide.",
  "QueueUrl" : "The URL of the Amazon SQS queue to which a message is sent. \nQueue URLs and names are case-sensitive.",
  "MessageBody" : "The message to send. The maximum string size is 256 KB.  \nA message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed: \n #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF  \nAny characters not included in this list will be rejected. For more information, see the W3C specification for characters."
}

send_message_batch

Delivers up to ten messages to the specified queue. This is a batch version of SendMessage. For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent. The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200. The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed: #x9 | #xA | #xD | #x20 to #xD7FF | #xE000 to #xFFFD | #x10000 to #x10FFFF
Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue. Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this: &Attribute.1=first
&Attribute.2=second

Parameters

$body

Type: object

{
  "Entries" : [ {
    "MessageAttribute" : "Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS Message Attributes in the Amazon Simple Queue Service Developer Guide.",
    "DelaySeconds" : "The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.   \nWhen you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.",
    "MessageGroupId" : "This parameter applies only to FIFO (first-in-first-out) queues. \nThe tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.  \n You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.  \n  ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.   \nThe length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~). \nFor best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon Simple Queue Service Developer Guide.  \n MessageGroupId is required for FIFO queues. You can't use it for Standard queues.",
    "Id" : "An identifier for a message in this batch used to communicate the result.  \nThe Ids of a batch request need to be unique within a request \nThis identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).",
    "MessageDeduplicationId" : "This parameter applies only to FIFO (first-in-first-out) queues. \nThe token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see  Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.  \n Every message must have a unique MessageDeduplicationId,   You may provide a MessageDeduplicationId explicitly.   If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).    If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.   If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.    \n When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.  \n If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.     \nThe MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues). \nIf a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages. \nAmazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.  \nThe length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~). \nFor best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon Simple Queue Service Developer Guide.",
    "MessageBody" : "The body of the message."
  } ],
  "QueueUrl" : "The URL of the Amazon SQS queue to which batched messages are sent. \nQueue URLs and names are case-sensitive."
}

set_queue_attributes

Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully. Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "Attribute" : "A map of attributes to set. \nThe following lists the names, descriptions, and values of the special request parameters that the SetQueueAttributes action uses:  \n  DelaySeconds - The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.   \n  MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 262,144 bytes (256 KiB). Default: 262,144 (256 KiB).   \n  MessageRetentionPeriod - The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days).   \n  Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.   \n  ReceiveMessageWaitTimeSeconds - The length of time, in seconds, for which a  ReceiveMessage  action waits for a message to arrive. Valid values: an integer from 0 to 20 (seconds). Default: 0.   \n  RedrivePolicy - The string that includes the parameters for the dead-letter queue functionality of the source queue. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.     deadLetterTargetArn - The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount is exceeded.    maxReceiveCount - The number of times a message is delivered to the source queue before being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.    The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.   \n  VisibilityTimeout - The visibility timeout for the queue, in seconds. Valid values: an integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.   \nThe following attributes apply only to server-side-encryption:  \n  KmsMasterKeyId - The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs, the alias of a custom CMK can, for example, be alias/MyAlias . For more examples, see KeyId in the AWS Key Management Service API Reference.   \n  KmsDataKeyReusePeriodSeconds - The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?.    \nThe following attribute applies only to FIFO (first-in-first-out) queues:  \n  ContentBasedDeduplication - Enables content-based deduplication. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.    Every message must have a unique MessageDeduplicationId,   You may provide a MessageDeduplicationId explicitly.   If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).    If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.   If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.     When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.   If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.    ",
  "QueueUrl" : "The URL of the Amazon SQS queue whose attributes are set. \nQueue URLs and names are case-sensitive."
}

tag_queue

Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide. When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "Tags" : "The list of tags to be added to the specified queue.",
  "QueueUrl" : "The URL of the queue."
}

untag_queue

Remove cost allocation tags from the specified Amazon SQS queue. For an overview, see Tagging Your Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide. When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
Cross-account permissions don't apply to this action. For more information, see see Grant Cross-Account Permissions to a Role and a User Name in the Amazon Simple Queue Service Developer Guide.

Parameters

$body

Type: object

{
  "TagKeys" : [ "string" ],
  "QueueUrl" : "The URL of the queue."
}