AWS Cloudwatch Logs (version v4.*.*)

associate_kms_key

Associates the specified AWS Key Management Service (AWS KMS) customer master key (CMK) with the specified log group. Associating an AWS KMS CMK with a log group overrides any existing associations between the log group and a CMK. After a CMK is associated with a log group, all newly ingested data for the log group is encrypted using the CMK. This association is stored as long as the data encrypted with the CMK is still within Amazon CloudWatch Logs. This enables Amazon CloudWatch Logs to decrypt this data whenever it is requested. Note that it can take up to 5 minutes for this operation to take effect. If you attempt to associate a CMK with a log group but the CMK does not exist or the CMK is disabled, you will receive an InvalidParameterException error.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "kmsKeyId" : "The Amazon Resource Name (ARN) of the CMK to use when encrypting log data. For more information, see Amazon Resource Names - AWS Key Management Service (AWS KMS)."
}

cancel_export_task

Cancels the specified export task. The task must be in the PENDING or RUNNING state.

Parameters

$body

Type: object

{
  "taskId" : "The ID of the export task."
}

create_export_task

Creates an export task, which allows you to efficiently export data from a log group to an Amazon S3 bucket. This is an asynchronous call. If all the required information is provided, this operation initiates an export task and responds with the ID of the task. After the task has started, you can use DescribeExportTasks to get the status of the export task. Each account can only have one active (RUNNING or PENDING) export task at a time. To cancel an export task, use CancelExportTask. You can export logs from multiple log groups or multiple time ranges to the same S3 bucket. To separate out log data for each export task, you can specify a prefix to be used as the Amazon S3 key prefix for all exported objects. Exporting to S3 buckets that are encrypted with AES-256 is supported. Exporting to S3 buckets encrypted with SSE-KMS is not supported.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "destinationPrefix" : "The prefix used as the start of the key for every object exported. If you don't specify a value, the default is exportedlogs.",
  "logStreamNamePrefix" : "Export only log streams that match the provided prefix. If you don't specify a value, no prefix filter is applied.",
  "destination" : "The name of S3 bucket for the exported log data. The bucket must be in the same AWS region.",
  "taskName" : "The name of the export task.",
  "from" : "The start time of the range for the request, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp earlier than this time are not exported.",
  "to" : "The end time of the range for the request, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not exported."
}

create_log_group

Creates a log group with the specified name. You can create up to 5000 log groups per account. You must use the following guidelines when naming a log group:
Log group names must be unique within a region for an AWS account.
Log group names can be between 1 and 512 characters long.
Log group names consist of the following characters: a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), and '.' (period).
If you associate a AWS Key Management Service (AWS KMS) customer master key (CMK) with the log group, ingested data is encrypted using the CMK. This association is stored as long as the data encrypted with the CMK is still within Amazon CloudWatch Logs. This enables Amazon CloudWatch Logs to decrypt this data whenever it is requested. If you attempt to associate a CMK with the log group but the CMK does not exist or the CMK is disabled, you will receive an InvalidParameterException error.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "kmsKeyId" : "The Amazon Resource Name (ARN) of the CMK to use when encrypting log data. For more information, see Amazon Resource Names - AWS Key Management Service (AWS KMS).",
  "tags" : "The key-value pairs to use for the tags."
}

create_log_stream

Creates a log stream for the specified log group. There is no limit on the number of log streams that you can create for a log group. You must use the following guidelines when naming a log stream:
Log stream names must be unique within the log group.
Log stream names can be between 1 and 512 characters long.
The ':' (colon) and '*' (asterisk) characters are not allowed.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "logStreamName" : "The name of the log stream."
}

delete_destination

Deletes the specified destination, and eventually disables all the subscription filters that publish to it. This operation does not delete the physical resource encapsulated by the destination.

Parameters

$body

Type: object

{
  "destinationName" : "The name of the destination."
}

delete_log_group

Deletes the specified log group and permanently deletes all the archived log events associated with the log group.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group."
}

delete_log_stream

Deletes the specified log stream and permanently deletes all the archived log events associated with the log stream.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "logStreamName" : "The name of the log stream."
}

delete_metric_filter

Deletes the specified metric filter.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "filterName" : "The name of the metric filter."
}

delete_resource_policy

Deletes a resource policy from this account. This revokes the access of the identities in that policy to put log events to this account.

Parameters

$body

Type: object

{
  "policyName" : "The name of the policy to be revoked. This parameter is required."
}

delete_retention_policy

Deletes the specified retention policy. Log events do not expire if they belong to log groups without a retention policy.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group."
}

delete_subscription_filter

Deletes the specified subscription filter.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "filterName" : "The name of the subscription filter."
}

describe_destinations

Lists all your destinations. The results are ASCII-sorted by destination name.

Parameters

$body

Type: object

{
  "DestinationNamePrefix" : "The prefix to match. If you don't specify a value, no prefix filter is applied."
}

describe_export_tasks

Lists the specified export tasks. You can list all your export tasks or filter the results based on task ID or task status.

Parameters

$body

Type: object

{
  "taskId" : "The ID of the export task. Specifying a task ID filters the results to zero or one export tasks.",
  "statusCode" : "The status code of the export task. Specifying a status code filters the results to zero or more export tasks."
}

describe_log_groups

Lists the specified log groups. You can list all your log groups or filter the results by prefix. The results are ASCII-sorted by log group name.

Parameters

$body

Type: object

{
  "logGroupNamePrefix" : "The prefix to match."
}

describe_log_streams

Lists the log streams for the specified log group. You can list all the log streams or filter the results by prefix. You can also control how the results are ordered. This operation has a limit of five transactions per second, after which transactions are throttled.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "logStreamNamePrefix" : "The prefix to match. \nIf orderBy is LastEventTime,you cannot specify this parameter.",
  "orderBy" : "If the value is LogStreamName, the results are ordered by log stream name. If the value is LastEventTime, the results are ordered by the event time. The default value is LogStreamName. \nIf you order the results by event time, you cannot specify the logStreamNamePrefix parameter. \nlastEventTimestamp represents the time of the most recent log event in the log stream in CloudWatch Logs. This number is expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. lastEventTimeStamp updates on an eventual consistency basis. It typically updates in less than an hour from ingestion, but may take longer in some rare situations.",
  "descending" : "If the value is true, results are returned in descending order. If the value is to false, results are returned in ascending order. The default value is false."
}

describe_metric_filters

Lists the specified metric filters. You can list all the metric filters or filter the results by log name, prefix, metric name, or metric namespace. The results are ASCII-sorted by filter name.

Parameters

$body

Type: object

{
  "metricName" : "Filters results to include only those with the specified metric name. If you include this parameter in your request, you must also include the metricNamespace parameter.",
  "logGroupName" : "The name of the log group.",
  "metricNamespace" : "Filters results to include only those in the specified namespace. If you include this parameter in your request, you must also include the metricName parameter.",
  "filterNamePrefix" : "The prefix to match."
}

describe_queries

Returns a list of CloudWatch Logs Insights queries that are scheduled, executing, or have been executed recently in this account. You can request all queries, or limit it to queries of a specific log group or queries with a certain status.

Parameters

$body

Type: object

{
  "logGroupName" : "Limits the returned queries to only those for the specified log group.",
  "status" : "Limits the returned queries to only those that have the specified status. Valid values are Cancelled, Complete, Failed, Running, and Scheduled."
}

describe_resource_policies

Lists the resource policies in this account.

This operation has no parameters

describe_subscription_filters

Lists the subscription filters for the specified log group. You can list all the subscription filters or filter the results by prefix. The results are ASCII-sorted by filter name.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "filterNamePrefix" : "The prefix to match. If you don't specify a value, no prefix filter is applied."
}

disassociate_kms_key

Disassociates the associated AWS Key Management Service (AWS KMS) customer master key (CMK) from the specified log group. After the AWS KMS CMK is disassociated from the log group, AWS CloudWatch Logs stops encrypting newly ingested data for the log group. All previously ingested data remains encrypted, and AWS CloudWatch Logs requires permissions for the CMK whenever the encrypted data is requested. Note that it can take up to 5 minutes for this operation to take effect.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group."
}

filter_log_events

Lists log events from the specified log group. You can list all the log events or filter the results using a filter pattern, a time range, and the name of the log stream. By default, this operation returns as many log events as can fit in 1 MB (up to 10,000 log events), or all the events found within the time range that you specify. If the results include a token, then there are more log events available, and you can get additional results by specifying the token in a subsequent call.

Parameters

$body

Type: object

{
  "filterPattern" : "The filter pattern to use. For more information, see Filter and Pattern Syntax. \nIf not provided, all the events are matched.",
  "logGroupName" : "The name of the log group to search.",
  "logStreamNamePrefix" : "Filters the results to include only events from log streams that have names starting with this prefix. \nIf you specify a value for both logStreamNamePrefix and logStreamNames, but the value for logStreamNamePrefix does not match any log stream names specified in logStreamNames, the action returns an InvalidParameterException error.",
  "logStreamNames" : [ "string" ],
  "startTime" : "The start of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp before this time are not returned.",
  "interleaved" : "If the value is true, the operation makes a best effort to provide responses that contain events from multiple log streams within the log group, interleaved in a single response. If the value is false, all the matched log events in the first log stream are searched first, then those in the next log stream, and so on. The default is false. \n IMPORTANT: Starting on June 17, 2019, this parameter will be ignored and the value will be assumed to be true. The response from this operation will always interleave events from multiple log streams within a log group.",
  "endTime" : "The end of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not returned."
}

get_log_events

Lists log events from the specified log stream. You can list all the log events or filter using a time range. By default, this operation returns as many log events as can fit in a response size of 1MB (up to 10,000 log events). You can get additional log events by specifying one of the tokens in a subsequent call.

Parameters

$body

Type: object

{
  "startFromHead" : "If the value is true, the earliest log events are returned first. If the value is false, the latest log events are returned first. The default value is false. \nIf you are using nextToken in this operation, you must specify true for startFromHead.",
  "logGroupName" : "The name of the log group.",
  "logStreamName" : "The name of the log stream.",
  "startTime" : "The start of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp equal to this time or later than this time are included. Events with a timestamp earlier than this time are not included.",
  "endTime" : "The end of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp equal to or later than this time are not included."
}

get_log_group_fields

Returns a list of the fields that are included in log events in the specified log group, along with the percentage of log events that contain each field. The search is limited to a time period that you specify. In the results, fields that start with @ are fields generated by CloudWatch Logs. For example, @timestamp is the timestamp of each log event. The response results are sorted by the frequency percentage, starting with the highest percentage.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group to search.",
  "time" : "The time to set as the center of the query. If you specify time, the 8 minutes before and 8 minutes after this time are searched. If you omit time, the past 15 minutes are queried. \nThe time value is specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC."
}

get_log_record

Retrieves all the fields and values of a single log event. All fields are retrieved, even if the original query that produced the logRecordPointer retrieved only a subset of fields. Fields are returned as field name/field value pairs. Additionally, the entire unparsed log event is returned within @message.

Parameters

$body

Type: object

{
  "logRecordPointer" : "The pointer corresponding to the log event record you want to retrieve. You get this from the response of a GetQueryResults operation. In that response, the value of the @ptr field for a log event is the value to use as logRecordPointer to retrieve that complete log event record."
}

get_query_results

Returns the results from the specified query. Only the fields requested in the query are returned, along with a @ptr field which is the identifier for the log record. You can use the value of @ptr in a operation to get the full log record. GetQueryResults does not start a query execution. To run a query, use . If the value of the Status field in the output is Running, this operation returns only partial results. If you see a value of Scheduled or Running for the status, you can retry the operation later to see the final results.

Parameters

$body

Type: object

{
  "queryId" : "The ID number of the query."
}

list_tags_log_group

Lists the tags for the specified log group.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group."
}

put_destination

Creates or updates a destination. A destination encapsulates a physical resource (such as an Amazon Kinesis stream) and enables you to subscribe to a real-time stream of log events for a different account, ingested using PutLogEvents. A destination can be an Amazon Kinesis stream, Amazon Kinesis Data Firehose strea, or an AWS Lambda function. Through an access policy, a destination controls what is written to it. By default, PutDestination does not set any access policy with the destination, which means a cross-account user cannot call PutSubscriptionFilter against this destination. To enable this, the destination owner must call PutDestinationPolicy after PutDestination.

Parameters

$body

Type: object

{
  "roleArn" : "The ARN of an IAM role that grants CloudWatch Logs permissions to call the Amazon Kinesis PutRecord operation on the destination stream.",
  "destinationName" : "A name for the destination.",
  "targetArn" : "The ARN of an Amazon Kinesis stream to which to deliver matching log events."
}

put_destination_policy

Creates or updates an access policy associated with an existing destination. An access policy is an IAM policy document that is used to authorize claims to register a subscription filter against a given destination.

Parameters

$body

Type: object

{
  "destinationName" : "A name for an existing destination.",
  "accessPolicy" : "An IAM policy document that authorizes cross-account users to deliver their log events to the associated destination."
}

put_log_events

Uploads a batch of log events to the specified log stream. You must include the sequence token obtained from the response of the previous call. An upload in a newly created log stream does not require a sequence token. You can also get the sequence token using DescribeLogStreams. If you call PutLogEvents twice within a narrow time period using the same value for sequenceToken, both calls may be successful, or one may be rejected. The batch of events must satisfy the following constraints:
The maximum batch size is 1,048,576 bytes, and this size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.
None of the log events in the batch can be more than 2 hours in the future.
None of the log events in the batch can be older than 14 days or older than the retention period of the log group.
The log events in the batch must be in chronological ordered by their timestamp. The timestamp is the time the event occurred, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. (In AWS Tools for PowerShell and the AWS SDK for .NET, the timestamp is specified in .NET format: yyyy-mm-ddThh:mm:ss. For example, 2017-09-15T13:45:30.)
The maximum number of log events in a batch is 10,000.
A batch of log events in a single request cannot span more than 24 hours. Otherwise, the operation fails.
If a call to PutLogEvents returns "UnrecognizedClientException" the most likely cause is an invalid AWS access key ID or secret key.

Parameters

$body

Type: object

{
  "logEvents" : [ {
    "message" : "The raw event message.",
    "timestamp" : "The time the event occurred, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC."
  } ],
  "logGroupName" : "The name of the log group.",
  "sequenceToken" : "The sequence token obtained from the response of the previous PutLogEvents call. An upload in a newly created log stream does not require a sequence token. You can also get the sequence token using DescribeLogStreams. If you call PutLogEvents twice within a narrow time period using the same value for sequenceToken, both calls may be successful, or one may be rejected.",
  "logStreamName" : "The name of the log stream."
}

put_metric_filter

Creates or updates a metric filter and associates it with the specified log group. Metric filters allow you to configure rules to extract metric data from log events ingested through PutLogEvents. The maximum number of metric filters that can be associated with a log group is 100.

Parameters

$body

Type: object

{
  "filterPattern" : "A filter pattern for extracting metric data out of ingested log events.",
  "metricTransformations" : [ {
    "metricName" : "The name of the CloudWatch metric.",
    "defaultValue" : "(Optional) The value to emit when a filter pattern does not match a log event. This value can be null.",
    "metricValue" : "The value to publish to the CloudWatch metric when a filter pattern matches a log event.",
    "metricNamespace" : "The namespace of the CloudWatch metric."
  } ],
  "logGroupName" : "The name of the log group.",
  "filterName" : "A name for the metric filter."
}

put_resource_policy

Creates or updates a resource policy allowing other AWS services to put log events to this account, such as Amazon Route 53. An account can have up to 10 resource policies per region.

Parameters

$body

Type: object

{
  "policyDocument" : "Details of the new policy, including the identity of the principal that is enabled to put logs to this account. This is formatted as a JSON string. This parameter is required. \nThe following example creates a resource policy enabling the Route 53 service to put DNS query logs in to the specified log group. Replace \"logArn\" with the ARN of your CloudWatch Logs resource, such as a log group or log stream. \n { \"Version\": \"2012-10-17\", \"Statement\": [ { \"Sid\": \"Route53LogsToCloudWatchLogs\", \"Effect\": \"Allow\", \"Principal\": { \"Service\": [ \"route53.amazonaws.com\" ] }, \"Action\":\"logs:PutLogEvents\", \"Resource\": \"logArn\" } ] }  ",
  "policyName" : "Name of the new policy. This parameter is required."
}

put_retention_policy

Sets the retention of the specified log group. A retention policy allows you to configure the number of days for which to retain log events in the specified log group.

Parameters

$body

Type: object

{
  "retentionInDays" : "Required integer",
  "logGroupName" : "The name of the log group."
}

put_subscription_filter

Creates or updates a subscription filter and associates it with the specified log group. Subscription filters allow you to subscribe to a real-time stream of log events ingested through PutLogEvents and have them delivered to a specific destination. Currently, the supported destinations are:
An Amazon Kinesis stream belonging to the same account as the subscription filter, for same-account delivery.
A logical destination that belongs to a different account, for cross-account delivery.
An Amazon Kinesis Firehose delivery stream that belongs to the same account as the subscription filter, for same-account delivery.
An AWS Lambda function that belongs to the same account as the subscription filter, for same-account delivery.
There can only be one subscription filter associated with a log group. If you are updating an existing filter, you must specify the correct name in filterName. Otherwise, the call fails because you cannot associate a second filter with a log group.

Parameters

$body

Type: object

{
  "filterPattern" : "A filter pattern for subscribing to a filtered stream of log events.",
  "logGroupName" : "The name of the log group.",
  "destinationArn" : "The ARN of the destination to deliver matching log events to. Currently, the supported destinations are:  \n An Amazon Kinesis stream belonging to the same account as the subscription filter, for same-account delivery.  \n A logical destination (specified using an ARN) belonging to a different account, for cross-account delivery.  \n An Amazon Kinesis Firehose delivery stream belonging to the same account as the subscription filter, for same-account delivery.  \n An AWS Lambda function belonging to the same account as the subscription filter, for same-account delivery. ",
  "roleArn" : "The ARN of an IAM role that grants CloudWatch Logs permissions to deliver ingested log events to the destination stream. You don't need to provide the ARN when you are working with a logical destination for cross-account delivery.",
  "filterName" : "A name for the subscription filter. If you are updating an existing filter, you must specify the correct name in filterName. Otherwise, the call fails because you cannot associate a second filter with a log group. To find the name of the filter currently associated with a log group, use DescribeSubscriptionFilters.",
  "distribution" : "The method used to distribute log data to the destination. By default log data is grouped by log stream, but the grouping can be set to random for a more even distribution. This property is only applicable when the destination is an Amazon Kinesis stream. "
}

start_query

Schedules a query of a log group using CloudWatch Logs Insights. You specify the log group and time range to query, and the query string to use. For more information, see CloudWatch Logs Insights Query Syntax. Queries time out after 15 minutes of execution. If your queries are timing out, reduce the time range being searched, or partition your query into a number of queries.

Parameters

$body

Type: object

{
  "logGroupNames" : [ "string" ],
  "logGroupName" : "The log group on which to perform the query. \nA StartQuery operation must include a logGroupNames or a logGroupName parameter, but not both.",
  "limit" : "The maximum number of log events to return in the query. If the query string uses the fields command, only the specified fields and their values are returned.",
  "startTime" : "The beginning of the time range to query. The range is inclusive, so the specified start time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC.",
  "endTime" : "The end of the time range to query. The range is inclusive, so the specified end time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC.",
  "queryString" : "The query string to use. For more information, see CloudWatch Logs Insights Query Syntax."
}

stop_query

Stops a CloudWatch Logs Insights query that is in progress. If the query has already ended, the operation returns an error indicating that the specified query is not running.

Parameters

$body

Type: object

{
  "queryId" : "The ID number of the query to stop. If necessary, you can use DescribeQueries to find this ID number."
}

tag_log_group

Adds or updates the specified tags for the specified log group. To list the tags for a log group, use ListTagsLogGroup. To remove tags, use UntagLogGroup. For more information about tags, see Tag Log Groups in Amazon CloudWatch Logs in the Amazon CloudWatch Logs User Guide.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "tags" : "The key-value pairs to use for the tags."
}

test_metric_filter

Tests the filter pattern of a metric filter against a sample of log event messages. You can use this operation to validate the correctness of a metric filter pattern.

Parameters

$body

Type: object

{
  "filterPattern" : "Required string",
  "logEventMessages" : [ "string" ]
}

untag_log_group

Removes the specified tags from the specified log group. To list the tags for a log group, use ListTagsLogGroup. To add tags, use UntagLogGroup.

Parameters

$body

Type: object

{
  "logGroupName" : "The name of the log group.",
  "tags" : [ "string" ]
}